22PLE VM1 Rim & Metal Coating - 30 ML
22PLE VM1 Rim and Metal Glass Coating is a new generation in ‘Glass Coatings’ offering amazing protection for your rims and metal trim. Developed in Japan, who are the leaders in liquid glass coatings, this new range offerings something that is unique; a professional wheel glass coating that is ultra-long lasting and easy to apply, previously this has not been possible.
22PLE VM1 Rim and Metal Glass Coating has been engineered for your rims to provide a thin layer of ‘hardened glass’ as a barrier for protection.
This new technology alloy wheel protection not only provides extra shine to your rims, but it also protects against the elements, repelling water, dirt and brake dust. The VM1 Rim and Metal Glass Coating also makes washing your alloy rims easier as dirt and brake dust will literally fall off as you rinse the car down, especially when using high pressure cleaners, and the super hydrophobic properties will also make drying easier, as water sheets off the surface quickly.
This ‘Glass Coating’ for your alloy rims is a new generation of liquid glass coatings, it is easy to apply and delivers an ultra-durable finish over your wheel surface that can easily last in excess of 18 months. There should be no need to use harsh wheel cleaners during this time, just wash carefully with a pH neutral shampoo at regular intervals.
A 30ml bottle should coat 4 rims (inside and face) easily up to 20" wheel, just depending on complexity and area.
For best results:
Ensure your wheel is clean, dry and free from contamination before you start. Take a surface cleaner or Isopropanol solution and cleanse the surface thoroughly making sure all areas are done. Again ensure all surfaces are completely dry. Take a soft applicator and apply a few drops of the VM1 Rim and Metal Glass Coating, wipe over the surface lightly ensuring the wheel receives a consistent coating. Work section by section allowing about 4-6 minutes before buffing off with a soft microfiber cloth.
We recommend working only one section ahead and performing a second wipe off to make sure the entire residue is taken off before it starts to harden.
Allow to cure for a minimum of 12 hours before getting the wheels wet. Do not wash the car for a minimum of 5 days after application.
We recommend IR Lamps to cure the coating - 2 feet away at approx. 45 deg C for 5 minutes
